Foil keyboard on printed cicuit board

PRINTED CIRCUIT BOARD:

• executed as continuous printed cicuit board FR4 CU35/35 2mm thick
• incl. breaking-throughs
• incl. 2 EP-threaded bolts M4x12
• incl. 4 EP-insert nuts / nuts M3
• through hole plated, solder resist
• front gold-contact
• milled
• assembled:
  1 x connection cable 160mm long
  with 2 x sockets/connectors 9 pin
  1 x connection cable 200mm long
  with 1 x socket/connector 14 pin
• 1 x pole disk
    16 x SMD-resistor on rear side
    20 x condensators provided
     3 x restrictors
     1 x Reed relay
     1 x photo diode and 1 x photo transistor
     1 x calibrating pushbutton
     1 x 14- pin SMD socket

FOIL KEYBOARD:

• made of polyester, small-grained
• 2-colour printing on the backside
• 4 key surfaces high embossed (pillow embossing)
• with integrated channels for plug-in strips
• with ESD-discharge
• display area printed in clear for LCD-display
• 4 pieces gilded snap domes 12mm
• integrated safety chamber
• ready-made a. laminated
• 100% electr. tested